Table of Contents
Advertisement
6.
Using the iSense
6.1 Selecting program
You can select one of the following programs via Program in
the main display:
•
Clock program: the central heating temperature is
controlled by the program you have set.
•
Continuous day: the temperature remains constant at the
day temperature you have set.
•
Continuous night: the temperature remains constant at
the night temperature you have set.
For details of the DHW standby function, see paragraph 9.2.
i
•
Frost protection: the temperature remains constant at the
frost protection temperature you have set. DHW standby is
switched off for this program.
•
Continuous summer: the temperature remains constant at
the night temperature, whereby the tap water is on standby
between 6.00 and 23.00 (which means that you will get hot
water more quickly).
6.2 Temporarily changing the temperature
You can (temporarily) switch off a selected clock program or
continuous program at any time by setting the temperature
manually.
1. Turn button C from the main display to set a new
temperature.
2. Press Adjust time if you also want to set an end time for
the manually-selected temperature, and select this time
using push-turn button C.
If you do not select an end time and a clock program was
i
active, that clock program will become active again at the
next switch point. Manual operation will then be switched off.
3. Press Adjust date if you also want to set an end date for
the manually selected temperature and select this date
using push-turn button C.
4. Press button C to return to the main menu or wait five
seconds until the thermostat automatically returns to the
main menu.
Press the Next program button to cancel the manual
temperature change.
6.3 Fireplace mode
Once the temperature has reached the desired level in the
room where the iSense has been positioned, the central heating
switches off. This may be inconvenient if, for example, you have
an open fire or if a lot of people are present in that room. Other
rooms in the house are also no longer heated in this situation.
You can switch on the fireplace mode via the Program button
so that the other rooms are still heated.
13
Hide quick links:
Advertisement
Table of Contents
