Using The Isense; Selecting A Program; Temporarily Changing The Temperature - REMEHA i Sense User Manual

6. Using the iSense

6.1 Selecting program
You can select one of the following programs via Program in the main display:
• Clock program: the central heating temperature is controlled by the program you have set.
• Continuous day: the temperature remains constant at the day temperature you have set.
• Continuous night: the temperature remains constant at the night temperature you have set.
• Frost protection: the temperature remains constant at the frost protection temperature you
have set. DHW standby is switched off for this program.
• Continuous summer: the temperature remains constant at the night temperature, whereby
the tap water is on standby between 6.00 and 23.00 (which means that you will get hot water
more quickly).

6.2 Temporarily changing the temperature

You can (temporarily) switch off a selected clock program or continuous program at any time by
setting the temperature manually.
1. Turn button C from the main display to set a new temperature.
2. Press Adjust time if you also want to set an end time for the manually-selected temperature,
and select this time using push-turn button C.
i If you do not select an end time and a clock program was active, that clock program will
become active again at the next switch point. Manual operation will then be switched off.
19