Table of Contents
Advertisement
7.
Changing usage settings
Large information line
Small information line
T001037-06-C
7.1 Setting the display
Using Menu > Settings > Users > Display, set the following:
•
Info line small: select what information should be
displayed on the small information line.
•
Info line large: select what information should be displayed
on the large information line.
•
Light time-out: set how many seconds the backlight must
remain on after the last button is touched.
7.2 Setting button locking
Button locking ensures that the buttons are locked if the iSense
has not been used for 30 seconds.
You can set this option using Menu > Settings > Users > Key
lock, applying a pin code if desired:
•
Off: button locking is switched off.
•
On: button locking is switched on and is disabled by
pressing button C twice.
•
On + pin code: button locking is switched on and is disabled
with the pin code you enter here.
If you have forgotten the pin code, you can always cancel
i
button locking with pin code 0012.
7.3 Setting the language
If you have the international version of the iSense, then you
can set the language for the menus via Menu > Settings >
Users > Language.
7.4 Setting the usage mode
You can select the user mode using Menu > Settings >
Users > User mode:
•
Basic: no clock programs can be used in this mode. You
can only set the temperature on the thermostat manually.
•
Normal: this is the standard mode. Most options are
available, such as the clock program.
•
Advanced: this mode lets you use two standard clock
programs (A and B), change more settings and request
more detailed operating information.
Some settings can only be changed in the "Advanced"
i
mode. The settings you create remain enabled in the
"Basic" and "Normal" modes.
7.5 Resetting factory settings
Using Menu > Settings > Users > Reset lets you restore all
the settings of the iSense, including the clock program, to the
factory settings.
15
Hide quick links:
Advertisement
Table of Contents
