Key Features - CDVI Galeo 2 Installation Manual

Weatherproof illuminated keypad with remote electronics
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION MANUAL
GALEO
Weatherproof Illuminated Keypad with remote electronics
Thank you for buying our products and for the confidence you placed
in our company.

1] KEY FEATURES

Polished heavy duty Zamak
alloy, high resistance to vandalism
12 backlit keys
2 independent relay outputs
(5A@250VAC)
Surface mount, indoor/outdoor
Free voltage*
Mounting with Torx
Weather resistant, keypad sealed
with epoxy
PCB of remote electronics protec-
ted with a varnish coating
100 user codes customisable by each user
Codes can range from 4 to 5 digits
Adjustable time relay of up to 99''
for each relay output or latched
Each output is assignable by group rank
Available in Wiegand version (GALEOW)
and with 3 relay outputs (GALEO3R)
Audible and visual feedback
*Input voltage : 12V to 24Vac and 12V to 48Vdc
Consumption
12 V
(3 relay outputs activated and
keypad illuminated)
90 mA
AC
100 mA
DC
2] NOTES & RECOMMENDATIONS
Cable
The distance between the GALEO and the remote
electronic can not exceed more than 10 meters.
Make sure that the cable is not near by a high
voltage cables (ex: 230 V AC).
Recommended cable between the
GALEO and the remote electronic
To expand the supplied 3 meter cable, select a 2
twisted pairs cable (4 wires), SYT1 0.8MM (AWG 20).
Recommended power supplies suitable
for the GALEO :
ADC335 (230V input) or BS60 (230V input).
2
cdvigroup.com
cast
®
screws
®
24 V
48 V
46 mA
-
55 mA
30 mA
Environmental tests:
vibrations
WEEE
Environmental test:
Salt spray
IP64
CE certification
-25°C to +70°C
REMOTE CONTROLLER
CE certification
WEEE
IP52
-20°C to +70°C
Mounting recommendations
Mount the keypad on a flat surface to avoid any
vandalism and to insure the best mounting.
Security advice
For security advice reasons, change the factory
default master code. When selecting a master code
and user code avoid sequencial codes (example :
3 4 5 6 7).
Back EMF protection
To secure the system from back electromagnetic
fields do not forget to mount the varistor in parallel
on the lock.
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Galeo 3

Table of Contents