Maintenance
Removing and Installing the Vibrator
5 - 8
Recommended tools: mini flat-tip screwdriver
Removing the vibrator:
(See Figure 17)
1.
Remove the back housing, refer to "Removing and Installing the Back Housing".
2.
Turn the back housing up side down and, using the screwdriver, remove the vibrator
from its chamber inside the back housing.
Installing the vibrator:
1.
Carefully push the vibrator into its chamber in the back housing.
2.
Install the back housing, refer to "Removing and Installing the Back Housing".
Figure 17
Back Housing
Vibrator
Vibrator Removal and Installation
68P02963C70-O