Motorola MTH500 Service Manual page 81

68P02963C70-O
NOTE: The application is now being written into the radio. A
progress bar is displayed on the computer screen
showing the writing status. The following display is
shown on the radio screen:
Appears at the
end of the process
After a successful writing, the message "The Operation
Was Successful" appear on the computer screen.
3. Press the "Ok" button.
4. Click the toolbar "R" (Reset) icon.
Diag. SW Ver. 01.01
HW ID Code: XXX
Flash: TE28F320C3BA
Command WRITE REQ.
--Done--
00:00:00
Elapsed Time
Programming the Radio
Indication
4 - 3