Attaching/Removing The Battery - Motorola APX 4000 2 Interactive End User Toolkit

APX 4000 (2 KNOBS)
 Attaching/Removing the Battery
Slide the battery into the radio's frame until the bottom latch
clicks into place.
PREPARING YOUR RADIO FOR USE
Battery
To remove the battery, turn the radio off. Lift up the latch then
slide the battery down to remove the battery from the radio.
Note: If your radio is preprogrammed with volatile-key
retention, the encryption keys are retained for approximately
30 seconds after battery removal.
Check with your dealer or system administrator for more
information. You can view the status of your IMPRES battery.
4
Battery Latch
CONTENTS < PREV NEXT >