Part Names And Settings Of The Gt157 - Mitsubishi Electric GOT1000 General Description Manual

2.3 Part Names and Settings of the GT157

2),3)
1)
5)
15)
6)
No. Name
1) POWER LED
2) Display screen
3) Touch key
4) Video/RGB interface
5) USB interface
6) RS-232 interface
7) Power terminal
8) Extension interface
9) CF card interface
10) CF card access LED
11) CF card access switch
Optional function board
12)
interface
Multi-color display board
13)
*2
interface
14) Reset switch
15) Hole for unit installation fitting
16) Battery holder
*1 It is provided for the GT1575V-S only.
*2 For the multi-color display board, refer to the following.
7)
Lit in green:Power is correctly supplied
Lit in orange:Screen saving
Blinks in orange/green:Blown back light bulb
Not lit :Power is not supplied
Displays the Utility and the user creation screen
For operating touch switches in the Utility and the user creation screen
For installing the video input unit, RGB input unit, video/RGB input unit,
*1
or RGB output unit
For connecting a personal computer
(Connector type: MINI-B)
For communicating with a controller or connecting a personal computer
(Connector type: D sub 9-pin)
Power input terminal, LG terminal, FG terminal
For installing an extension unit
For installing a CF card
Lit :CF card accessed
Not lit:CF card not accessed
Used for stopping the access to the CF card before removing the CF
card from the GOT
ON :CF card being accessed
(CF card removal prohibited)
OFF :CF card not accessed
(CF card removal possible)
For installing the optional function board
For installing the multi-color display board (For GT1575-VN and
GT1572-VN, 65536 color display is not supported even with the multi-
color display board installed.)
Hardware reset switch
(Inoperative in the bus connection or with the bus connection unit
installed)
Hole for inserting the unit installation fitting
Houses the battery
3.2.3 GT1575V-S, GT1575-S, GT1575-V, GT1575-VN,
GT1572-VN
GOT Rear face
12)
15)
Description
5
8) 14)
9)
16)
10)
11)
4)
13)