Put A Call On Hold; Make A Second Call; Accept A Second Call - Cisco 7945 Quick Start Manual

3. When you hear the long distance tone, enter your six-digit long distance calling
code.
4. When you are done, hang up.

Put a call on hold

To place a call on hold, do the following:
1. While you are on a call, press the
2. To take a call off hold, press the

Make a second call

While you have a call on hold, you can make a second call without hanging up. To make a
second call, do the following:
1. While you are on a call, press the
2. Press the New Call button.
3. Enter the phone number for the second call.
4. To switch back to the first call, press up on the arrow pad to select the first call.
5. Press the Resume button. This places the second call on hold.
6. To end an active call, press the
resume it before you can end it.

Accept a second call

While you are on a call, you can answer a second call. If you don't answer the second
call, it is sent to your voice mail. To accept a second call, do the following:
1. If you are on a call when receive a second call, you will hear a beep and the
second caller's phone number will appear on your phone display.
2. To accept the second call, press the
hold.
3. To switch back to the first call, press up on the arrow pad to select the first call.
4. Press the Resume button. This places the second call on hold.
5. To end an active call, press the
Hold button.
Resume button.
Hold button. This places the first call on hold.
End Call button. If a call is on hold, you must
Answer button. This places the first call on
End Call button. If a call is on hold, you must
7