Cisco 7945 User Manual

Advanced Telephone Tasks
Call transfer:

During a call press the Transfer soft key. This places the call on hold.

Dial the number or office extension to which you want to transfer the call.

When it rings on the other end, press Transfer again. Or, when the party answers, an-
nounce the call and then press Transfer. If the answering party does not want the call
press End Call then press Resume to return to the original caller.
Forwarding Calls:

Press the CFwdAll soft key. You should hear two beeps.

Enter the number to which you want to forward all of your calls, exactly as you would if
you were placing a call to that number. (After you enter the number, an animated phone
icon with a flashing right arrow appears in the upper-right corner of the LCD screen.
The LCD screen also displays a message confirming the number or extension to which
your calls are being forwarded).

To cancel call forwarding, press the CFwdAll soft key.
Placing a Conference Call:

During a call, press the More soft key and then the Confrn soft key. Doing so automati-
cally activates a new line and puts the first party on hold.

Place a call to another number or extension.

When the call connects, press Confrn again to add the new party to the conference call.

Repeat these steps to add parties to the conference call.
Guide to the Cisco 7945 IP Telephone