Cisco 7945 User Manual

UNIVERSITY OF DELAWARE
Cisco 7945 User Guide
1 Line activation-Buttons
7945: 2 Programmable Buttons
2 Foot Stand Button
3 Display Buttons
4
Messages Button
5 Directories Button
6 Help Button
7 Settings Button
8 Services Button
9 Volume Button
10 Speaker Button
11 Mute Button
12 Headset Button
13 4-way Navigation Button
14 Keypad
15 Softkey Buttons
16 Voicemail lamp/Phone lamp
17 Phone Screen (Touch Screen for 7975)
Busy Lamp Field/Line Buttons
Green, steady—Active call or two-way call
Green, flashing—Held call
Amber, steady—Privacy in use or one-way
intercom call
Amber, flashing—Incoming call or reverting
call
Red, steady—Remote line in use
Off—line available for use
1

Basic Call Handling

To view basic dialing instructions, see the following website:
http://www.udel.edu/voip/dialing.html
B
ASIC
A
While idle:
H
While on an active call:
1.
2.

Call Waiting

During an active call, if a second call rings in,
you will hear a single beep. To answer,
press the Answer softkey
(the original call will be placed on hold automatically).
C
ALL
Start with two connected calls.
1.
2.
3.
4.
Last Revised 11/22/2013 12:09 PM
C P O
ALL LACING PTIONS

Pick up the handset.

Press the Call or Redial icon.

Press the Speaker button.
 Press a Speed Dial button.
C
NSWERING ALLS

Lift the handset.

Press the Speaker button.

Press the amber flashing button.
/R
OLD ESUME
Press the Hold softkey.
Press the Resume softkey.
J
OIN
Make sure that one of the calls is active (not on
hold). If both calls are on hold, resume one call.
Highlight the call on hold.
Press More softkey.
Press Join.