Analogue Levels - Cooper CF2000 Installation Manual

Testing (Analogue Levels)
The "Analogue Levels" screen is accessed as shown below. The events screens are
accessed from the healthy screen by first pressing any button. You will then be
prompted to enter the passcode which will show the screen below by default. Press
"OK" and scroll through the list of events using the UP and Down arrow buttons.
hh.mm.ss
System Healthy
1 Zone(s) Active
Scroll through the events list using the
scroll buttons as shown
dd.mm.yy
000AC
Cancel
OK Mute
Reset
FPE
Use the scroll up and down buttons
to highlight the device and the "OK"
to view Device Values
70
Enter Passcode
Using to scroll keys show to the left
scroll to the Analogue Levels screen
Switch between Loop 1 and Loop2 by
using the sideways scroll buttons shown
to the left and press "OK" to select.
Address
Testing

Analogue Levels

Press "OK"
Loop 2
Loop 1
Device List
Device
Analogue valve sceen
4
4.6