Test Zone - Cooper CF2000 Installation Manual

Testing (Test Zone)
The "Test Device" screen is accessed as shown below. The events screens are
accessed from the healthy screen by first pressing any button. You will then be
prompted to enter the passcode which will show the screen below by default. Press
"OK" and scroll through the list of events using the UP and Down arrow buttons.
hh.mm.ss
System Healthy
1 Zone(s) Active
Scroll through the events list using the
scroll buttons as shown
dd.mm.yy
000AC
OK Cancel
Mute
Reset
FPE
Enter Passcode
Using to scroll keys show to the left
Use the scroll up and down buttons
to highlight the device and the "OK"
button to switch between "Test"
and "Not Test"
66
Testing
scroll to the Test Zones screen

Test Zone

Press "OK"
Press "OK"
Zones in Test
Zone Status
4
4:2