Table of Contents
Advertisement
Controls
at a Glance............................
Clock and Timer Control
[.1
DC
: __1 __1
NOTE: The display will flash when electrical power is first supplied to the appliance or if there has been a power
failure.
To Set the Clock:
1, Press the CLOCK pad.
2. Press or press and hold the • or • pad until tl
correct time appears in the display.
• A beep will sound when the CLOCK pad is pressed.
2, Press or press and hold the • or • pad until the correct
• Press to change the time in one minute incremer
time of day appears in the display.
• Press and hold to change the time in 10 minuf
increments.
• Press to change the time in one minute increments.
• The timer will start automatically after a few
• Press and hold to change the time in 10 minute increments.
seconds. The flashing colon indicates that the
To recall the time of day when the timer operation is displayed,
timer is in use.
press the CLOCK pad.
• If the CLOCK pad is pressed, the colon will
continue to flash to indicate the timer is in us
To
Set the Timer:
3. A beep will sound at one minute (0:01).
4, At the end of the timer operation, 0:00 will app
The timer can be set from one minute (0:0l) up to 12 hours
in the display and three beeps will sound.
(12:00). The timer does NOT control the oven.
• One beep will sound every 10 seconds for 10
1. Press the TIMER pad.
minutes or until the timer operation is cancell
• A beep will sound when the TIMER pad is pressed.
• 0:00 will appear in the display.
To Cancel the _mer:
Press the TIMER pad and the current time of day '
reappear in the display.
NOTE: When 0:00 is displayed, pressing either
TIMER or CLOCK pad will also cancel the timer
eration.
•
_! • i_!
i_ "_
Advertisement
Table of Contents
