Maintenance - Maytag MGR4410ADH User Manual

Table of Contents

Advertisement

Maintenance..........................................
Oven Door
Oven Light
ACAUTION:
CAUTIONS:
Do not place excessive weight on or stand on an open
• Disconnect power to range before replacing light bulb.
oven door. This could cause the range to tip over,
, Use a dry potholder to prevent possible harm to hands
break the door, or injure the user.
when replacing bulb.
Do not attempt to open or close door or operate oven
• Be sure bulb is cool before touching bulb.
until door is properly replaced.
• Do not touch hot bulb with a damp cloth as this may
Never place fingers between hinge and front oven
cause the bulb to break.
frame. Hinge arms are spring mounted. If acciden-
tally hit, the hinge will slam shut against oven frame
To replace oven light bulb:
and could injure your fingers.
1. Remove light bulb.
To remove:
1. When cool, open the oven door
_
2, Replace with a 40 watt appliance bulb.
to the first stop position (opened
_
3. Reconnect power to range. Reset clock.
about four inches).
2. Grasp door at each side. Do not
Leveling Legs
use the door handle to lift door.
[A
3. Lift up evenly until door clears
],_m, CAUTION:
secures one of the rear
hinge arms.
] •
Be sure the anti-tip bracket prevent the range from
[
leveling legs to the floor to
To replace:
[
accidentally tipping.
1. Grasp door at each side.
TherangeshouldbeleveledwheninstaUed.
If the /_
range is not level, turn the plastic leveling legs,
Jl_-.. ill
2. Align slots in the door with the hinge arms on the range,
located at each corner of the range, until f_t_
_.'!]
3. Slide the door down onto the hinge arms until the door
range is level.
__S
is completely seated on the hinges. Push down on the top
comers of the door to completely seat door on hinges.
_
_,/
_cK_
Door should not appear crooked.
_
\LEv_L,_L_
NOTE: The oven door on a new range may feel "spongy"
Electrical Connection
when it is closed. This is normal and will decrease with use.
Appliances which require electrical power are equipped
with a three-prong grounding plug which must
be plugged directly into a properly grounded
[ (Ti_ ']
Oven Window
(select models)
three-hole 120 volt electrical outlet.
To protect the oven door window:
Always disconnect power to appliance be-
1. Do not use abrasive cleaning agents such as steel wool
fore servicing.
scouring pads or powdered cleansers as they may
The three-prong grounding plug offers protection against
scratch the glass,
shock hazards. DO NOT CUT OR REMOVE
THE
THIRD GROUNDING PRONG FROM THE POWER
2. Do not hit the glass with pots, pans, furniture, toys, or
CORD PLUG.
other objects.
If an ungrounded, two-hole or other type electrical outlet is
3. Do not close the oven door until the oven racks are in
encountered, it is the personal responsibility of the appli-
place,
ante owner to have the outlet replaced with a properly
grounded three-hole electrical outlet.
Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of breakage
at a later date.
12

Advertisement

Table of Contents
loading

Table of Contents