Table of Contents
Advertisement
Chapter 8 The NAT Configuration Screens
The following table describes the icons in this screen.
Table 25 Advanced> VPN Transport > Customer Interface
ICON
The following table describes the labels in this screen.
Table 26 ADVANCED > NAT Configuration > Port Forwarding
LABEL
Default Server Setup
Default Server
Port Forwarding
#
Active
Name
Start Port
End Port
Server IP
Address
Action
Apply
Reset
80
DESCRIPTION
Edit
Click to edit this item.
Delete
Click to delete this item.
DESCRIPTION
Enter the IP address of the server to which the OX253P should forward
packets for ports that are not specified in the Port Forwarding section
below or in the TOOLS > Remote MGMT screens. Enter 0.0.0.0 if you
want the OX253P to discard these packets instead.
The number of the item in this list.
Select this to enable this rule. Clear this to disable this rule.
This field displays the name of the rule. It does not have to be unique.
This field displays the beginning of the range of port numbers forwarded
by this rule.
This field displays the end of the range of port numbers forwarded by
this rule. If it is the same as the Start Port, only one port number is
forwarded.
This field displays the IP address of the server to which packet for the
selected port(s) are forwarded.
Click the Edit icon to set up a port forwarding rule or alter the
configuration of an existing port forwarding rule.
Click the Delete icon to remove an existing port forwarding rule.
Click to save your changes.
Click to restore your previously saved settings.
OX253P User's Guide
Advertisement
Table of Contents
