Table of Contents
Advertisement
Chapter 15 The Logs Screens
F
or type and code details, see
Table 70 ICMP Logs
LOG MESSAGE
Firewall default policy: ICMP
<Packet Direction>, <type:%d>,
<code:%d>
Firewall rule [NOT] match: ICMP
<Packet Direction>, <rule:%d>,
<type:%d>, <code:%d>
Triangle route packet forwarded:
ICMP
Packet without a NAT table entry
blocked: ICMP
Unsupported/out-of-order ICMP:
ICMP
Router reply ICMP packet: ICMP
Table 71 PPP Logs
LOG MESSAGE
ppp:LCP Starting
ppp:LCP Opening
ppp:CHAP Opening
ppp:IPCP
Starting
ppp:IPCP Opening
ppp:LCP Closing
ppp:IPCP Closing
Table 72 UPnP Logs
LOG MESSAGE
UPnP pass through Firewall
158
Table 76 on page
DESCRIPTION
ICMP access matched the default policy and was
blocked or forwarded according to the user's
setting.
ICMP access matched (or didn't match) a firewall
rule (denoted by its number) and was blocked or
forwarded according to the rule.
The firewall allowed a triangle route session to
pass through.
The router blocked a packet that didn't have a
corresponding NAT table entry.
The firewall does not support this kind of ICMP
packets or the ICMP packets are out of order.
The router sent an ICMP reply packet to the
sender.
DESCRIPTION
The PPP connection's Link Control Protocol stage has started.
The PPP connection's Link Control Protocol stage is opening.
The PPP connection's Challenge Handshake Authentication Protocol
stage is opening.
The PPP connection's Internet Protocol Control Protocol stage is
starting.
The PPP connection's Internet Protocol Control Protocol stage is
opening.
The PPP connection's Link Control Protocol stage is closing.
The PPP connection's Internet Protocol Control Protocol stage is
closing.
DESCRIPTION
UPnP packets can pass through the firewall.
161.
OX253P User's Guide
Advertisement
Table of Contents
