Zte OX253P User Manual page 176

If the problem continues, contact your ISP.
7
I cannot access the Internet any more. I had access to the Internet (with the
OX253P), but my Internet connection is not available any more.
Check the hardware connections, and make sure the LEDs are behaving as
1
expected. See the Quick Start Guide and
Disconnect and re-connect the power adapter to the OX253P.
2
If the problem continues, contact your ISP.
3
The Internet connection is slow or intermittent.
The quality of the OX253P's wireless connection to the base station may be poor.
1
Poor signal reception may be improved by moving the OX253P away from thick
walls and other obstructions, or to a higher floor in your building.
There may be radio interference caused by nearby electrical devices such as
2
microwave ovens and radio transmitters. Move the OX253P away or switch the
other devices off. Weather conditions may also affect signal quality.
There might be a lot of traffic on the network. Look at the LEDs, and check
3
1.2.1 on page
closing some programs that use the Internet, especially peer-to-peer applications.
Disconnect and re-connect the power adapter to the OX253P.
4
If the problem continues, contact the network administrator or vendor, or try one
5
of the advanced suggestions.
The Internet connection disconnects.
Check your WiMAX link and signal strength using the WiMAX Link and Strength
1
Indicator LEDs on the device.
Contact your ISP if the problem persists.
2
OX253P User's Guide
20. If the OX253P is sending or receiving a lot of information, try
Chapter 17 Troubleshooting
Section 1.2.1 on page 20.
Section
177