Zte OX253P User Manual page 174

I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is http://192.168.1.1.
• If you changed the IP address
address.
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
Check the hardware connections, and make sure the LEDs are behaving as
2
expected. See the Quick Start Guide and
Make sure your Internet browser does not block pop-up windows and has
3
JavaScript and Java enabled. See
If there is a DHCP server on your network, make sure your computer is using a
4
dynamic IP address. Your OX253P is a DHCP server by default.
If there is no DHCP server on your network, make sure your computer's IP
address is in the same subnet as the OX253P. See
Reset the OX253P to its factory defaults, and try to access the OX253P with the
5
default IP address. See
If the problem continues, contact the network administrator or vendor, or try one
6
of the advanced suggestions.
Advanced Suggestions
• Try to access the OX253P using another service, such as Telnet. If you can
access the OX253P, check the remote management settings and firewall rules to
find out why the OX253P does not respond to HTTP.
• If your computer is connected wirelessly, use a computer that is connected to a
LAN/ETHERNET port.
I can see the Login screen, but I cannot log in to the OX253P.
Make sure you have entered the user name and password correctly. The default
1
user name is admin, and the default password is admin. These fields are case-
sensitive, so make sure [Caps Lock] is not on.
OX253P User's Guide
(Section 5.2 on page
I forgot the IP address for the OX253P.
Appendix C on page
Section 9.6 on page
Chapter 17 Troubleshooting
48), use the new IP
Section 1.2.1 on page
217.
Appendix D on page
95.
20.
229.
175