Table of Contents
Advertisement
Table 12 ADVANCED > LAN Configuration > DHCP Setup (continued)
LABEL
IP Pool Starting
Address
Pool Size
DNS Server
First, Second
and Third DNS
Server
Apply
Reset
OX253P User's Guide
DESCRIPTION
Enter the IP address from which the OX253P begins allocating IP
addresses, if you have not specified an IP address for this computer in
ADVANCED > LAN Configuration > Static DHCP.
Enter the number of IP addresses to allocate. This number must be at
least one and is limited by a subnet mask of 255.255.255.0 (regardless
of the subnet the OX253P is in). For example, if the IP Pool Start
Address is 10.10.10.10, the OX253P can allocate up to 10.10.10.254,
or 245 IP addresses.
Specify the IP addresses of a maximum of three DNS servers that the
network can use. The OX253P provides these IP addresses to DHCP
clients. You can specify these IP addresses two ways.
From ISP - provide the DNS servers provided by the ISP on the WAN
port.
User Defined - enter a static IP address.
DNS Relay - this setting will relay DNS information from the DNS
server obtained by the OX253P.
None - no DNS service will be provided by the OX253P.
Click to save your changes.
Click to restore your previously saved settings.
Chapter 6 The LAN Configuration Screens
55
Advertisement
Table of Contents
