Table of Contents
Advertisement
Chapter 7 The WAN Configuration Screens
example). The following figure shows an MS-equipped notebook computer MS1
moving from base station BS1's coverage area and connecting to BS2.
Figure 17 WiMax: Mobile Station
WiMAX technology uses radio signals (around 2 to 10 GHz) to connect subscriber
stations and mobile stations to local base stations. Numerous subscriber stations
and mobile stations connect to the network through a single base station (BS), as
in the following figure.
Figure 18 WiMAX: Multiple Mobile Stations
A base station's coverage area can extend over many hundreds of meters, even
under poor conditions. A base station provides network access to subscriber
stations and mobile stations, and communicates with other base stations.
The radio frequency and bandwidth of the link between the OX253P and the base
station are controlled by the base station. The OX253P follows the base station's
configuration.
66
OX253P User's Guide
Advertisement
Table of Contents
