Table of Contents
Advertisement
Chapter 14 QoS
Table 60 Create New Class (continued)
LABEL
Filter Configuration
Use this section to define traffic to which this class will apply. The logical relationship of
the following parameters is "AND". Select Exclude next to a parameter to not apply the
class to the traffic matching the criteria.
Source
Address
Subnet Mask
Port Range
Destination
Address
Subnet Mask
Port Range
Others
Service
Protocol
Apply
Cancel
148
DESCRIPTION
Enter a source IP address and the subnet mask for the criteria.
Enter a port range on the source host for the criteria.
Enter a destination IP address and the subnet mask for the criteria.
Enter a port range on the destination host for the criteria.
Select the traffic type of a service (SIP, FTP or H.323) to which this
class will apply.
Select TCP or UDP to specifiy the traffic type to which the class will
apply. You can also select User Defined and enter the number of a
protocol.
Click this button to save your changes back to the OX253P.
Click this button to begin configuring this screen afresh.
OX253P User's Guide
Advertisement
Table of Contents
