Setting; Brightness; Calibration; About - Kimo SL200 User Manual

IV – Setting
Accessible from the principal measuring screen by successive pushes on the key
instrument. They also inform users.

Brightness

To optimize display reading, the operator can :
1. Adjust brightness by pressing
2. Backlight LCD display for a better reading in a dark place.
"No" means backlight is switch off and "Yes" it is switch on.
In this last case, battery life is reduced by about 15%.

Calibration

To recall calibration conditions including calibration coefficient of the sensor.
It is strongly recommended not to change the instrument calibration, this screen is reserved to the
manufacturer or laboratory partner.
In case of unwanted push on a key, an alert occurs: Caution modification! .
Leave via the keys or
In case of sensor replacement, please refer to METROLOGY Chapter.

About

Information on origin of manufacture and dates of last and next audits.
French
By pressing and
Choose language : French or English.
V – During measurement

Irradiance

Once switched on, the instrument measures and displays twice a second the instantaneous value of solar
power (or irradiance) in W/m2. This value gives information to users about sunshine local conditions.
Display :
Solar power W/m2
●
Maximum value
●
Minimum Value
●
-
+
and
English
keys, you can
Functions :
Reset minimum and maximum values
●
Activate pause function
●
Continue measurement
●
function keys.
About - French
, those different screens allow setting of the
Calibration coefficient
About - English
Energetic exposure
6
Brightness