Pc Control Software - Master audio DSP306USB User Manual

Master Audio

8.PC CONTROL SOFTWARE

The DSP units are shipped with a special PC Graphic User Interface (GUI)
application - DSPLink. DSPLink gives the user an option to control the DSP unit from
a remote PC via the USB communication link (or optionally through Ethernet with the
optional Ethernet card). For the USB connection a driver must be installed (included
with the DSPLink installation package). For the Ethernet connection, the IP address
should be set as indicated in section 6.3.9 of this manual.
The GUI application makes it much easier to control and monitor the device, allowing
the user to get the whole picture on one screen. Programs can be recalled and stored
from/to PC's hard drive, thus expanding the storage to become virtually limitless.
DSPSeries - MUS - Ver 1.1 ENG Nov 10 21