Master audio DSP306USB User Manual page 14

Master Audio
• RATIO – The compressor ratio determines the slope in which the signal is
compressed. Ranges from 1:1 (no compression) to 1:40 are available.
I1:______ Comp
RATIO: 1:1
6.1.6.Name - Channel Name
• NAME - Channel name. It is 6 characters in length.
I1:______ Name
NAME:______
Output Menus
6.2.
To access the Output Menus, hold the <Menu or Menu> key and press the Mute key
of the desired channel. The green led below the Mute key will light up. More than one
output channel may be selected by holding the Menu key and pressing the
corresponding Mute key. Press Exit to deselect all.
The following menus are available for each ouput channel:
6.2.1.Signal - Signal parameters
• Refer to the Input Menus for details
6.2.2.EQ - EQ parameters
• Refer to the Input Menus for details
6.2.3.XOver - Crossover parameters
• Refer to the Input Menus for details
6.2.4.Limit - Output Limiter
• THRESH - Limiter Threshold. Ranges from -20 to +20dBu in 0.5dB steps.
O1:______ Limit
THRESH:0.0dBu
• ATTACK - Attack time. Ranges from 0.3 to 1ms in 0.1ms steps, then ranges from 1
to 100ms in 1ms steps.
DSPSeries - MUS - Ver 1.1 ENG Nov 10 14