Master audio DSP306USB User Manual page 12

Master Audio
• BYPASS – When set On, the currently selected GEQ will be bypassed.
I1:______ GEQ1
BYPASS:Off
6.1.4.Crossover
• TYPL - Filter Type of low frequency crossover point (high pass). Types can be
Butterworth, Linkwitz-Riley or Bessel.
I1:______ XOver
TYPL:Off
• FRQL - Filter cut-off Frequency of low frequency crossover point (high pass).
Ranges from 20Hz to 30kHz in either 1Hz steps or 1/36 octave steps. The frequency
steps can be selected in the System Menu.
I1:______ XOver
FRQL:1000Hz
• SLPL - Filter Slope of low frequency crossover point (high pass). Ranges from 6 to
48dB/octave. If the selected Filter Type is Linkwitz-Riley, the available slopes are 12 /
24 / 36 / 48 dB/octave.
I1:______ XOver
SLPL:24dB
• TYPH - Filter Type of high frequency crossover point (low pass). Same types as for
high pass filters are available: Butterworth, Linkwitz-Riley and Bessel.
I1:______ XOver
TYPH:Off
• FRQH - Filter cut-off frequency of high frequency crossover point (low pass).
I1:______ XOver
FRQH:1000Hz
DSPSeries - MUS - Ver 1.1 ENG Nov 10 12