Master audio DSP306USB User Manual page 11

Master Audio
• TYPE - Type of EQ. The types can be parametric (PEQ), Lo-shelf (LO-SHF), Hi-
st
shelf (HI-SHF), 1 degree all-pass (AP-1) and 2
I1:______ EQ1
TYPE:PEQ
• FREQ - EQ center frequency. Ranges from 20 to 20,000Hz in either 1Hz steps or
1/36 octave steps. The frequency steps can be selected in the System Menu.
I1:______ EQ1
FREQ:1000Hz
• BW - EQ Bandwidth. Ranges from 0.02 to 3.61 octaves, in steps of 0.01 octave
steps for PEQ, LO/HI-SHF and AP-2. For AP-1, the bandwidth sets the phase shift at
the centre frequency. This phase is gradually changed from 180 degrees above the
centre frequency to the specified value.
I1:______ EQ1
BW:0.33 Q=4.36
• LEVEL - EQ level gain. Ranges from -30.00dB to +15.00dB in 0.25dB steps.
I1:______ EQ1
LEVEL:0.00dB
6.1.3. Input Graphic Equalizer
• GEQ# - Selects one of the 31 available bands, from 20Hz to 20kHz. The selected
frequency is shown.
I1:______ GEQ1
GEQ#:1
• LEVEL - GEQ level gain. Ranges from -30.00dB to +15.00dB in 0.25dB steps.
I1:______ GEQ1
LEVEL:0.00dB
DSPSeries - MUS - Ver 1.1 ENG
f=20
nd
degree all-pass (AP-2).
I1:______ EQ1
DEG:15.5 deg
Nov 10 11