Master audio DSP306USB User Manual page 16

Master Audio
6.3.1.Recall - Program Recall
The DSP unit has a built-in non-volatile memory that can store up to 30 different
program setups. A program can be recalled using this menu.
• P:# - Program Number to be recalled. Press Enter twice to confirm the operation.
SYSTEM
P:1 ____________
6.3.2.Store - Program store
A program can be stored using this menu. The old program with the same program
number will be replaced. Once the program is stored in the flash memory, it can be
recalled at a later time, even after power down.
• P:# - Program Number for the current data to be stored.
SYSTEM
P:1
• NAM - Program Name, allows a maximum length of 12 characters.
SYSTEM
NAM:____________
6.3.3.Config - Device Configuration
SYSTEM
MODE:None
• MODE - configures the mode of operation. The possible modes are shown in the
following table:
Mode Out 1
None Any
Stereo 2-Way In1
Stereo 3-Way In1
Stereo 4-Way
In1
(408 only)
The unit assigns the Input source for the corresponding outputs when the Mode of
Configuration is selected. The crossover point parameters like the filter type, cut-off
DSPSeries - MUS - Ver 1.1 ENG
Recall
Store
Store
Config
Out 2 Out 3 Out 4
Any Any Any
In1 In2 In2
In1 In1 In2
In1 In1 In1
Out 5 Out 6 Out 7
(408 only)
Any Any Any
Any Any Any
In2 In2 Any
In2 In2 In2
Out 8
(408 only)
Any
Any
Any
In2
Nov 10 16