Operating The Device - Master audio DSP306USB User Manual

Master Audio

6.OPERATING THE DEVICE

Input Menus
6.1.
To access the Input Menus, hold the <Menu or Menu> key and press the Mute key of
the desired channel. The green led below the Mute key will light up. More than one
input channel may be selected by holding the Menu key and pressing the
corresponding Mute key. Press Exit to deselect all.
The following menus are available for each input channel:
6.1.1. Signal - Signal parameters
• LEVEL - Gain, -40.00dB to +15.00dB in 0.25dB steps.
I1:______ Signal
LEVEL:0.00dB
• POL - Polarity, can be normal (+) or inverted (-).
I1:______ Signal
POL:+
• DELAY - Delay in 11us steps. It can be displayed in ms, ft or m. The time unit of the
delay can be changed in the System menu. The maximum delay permitted is 650ms.
I1:______ Signal
DELAY:000.000ms
6.1.2.EQ - EQ parameters
• EQ# - Selects one of the 8 available Equalizers.
I1:______ EQ1
EQ#:1
• BYPASS – When set On, the currently selected EQ will be bypassed.
I1:______ EQ1
BYPASS:Off
DSPSeries - MUS - Ver 1.1 ENG Nov 10 10