The Front Panel - Master audio DSP306USB User Manual

Master Audio

3.THE FRONT PANEL

A
B C
A) USB Connector – A standard type B USB connector for interface with a PC.
Software and driver must be installed prior to usage.
B) Mute keys - Mute/Unmute input and output channels. When an input channel is
muted, they key will light up in red for indication.
The Mute keys are also used to access the program of each channel in combination
with the Menu> and <Menu keys. Holding one of the Menu keys and pressing the
Mute key of the desired channel will give access to the channel parameters, and will
be acknowledged by a green led below the mute key. Multiple channels can be linked
or unlinked to ease the programming. Inputs and outputs are linked separately.
C) Channel Menu LED – Indicates the activated channels for parameter modification
D) Peak Level LED - Indicates the current peak level of the Signal: Signal, -12dB, -
6dB, -3dB, Overload/Limit. The Input Overload LED references to the device's
maximum headroom. The Output Limit LED references to the threshold of the
limiter.
E) LCD - Shows all the necessary information to control the unit.
F) Menu Control keys - There are 6 menu keys: <Menu (Menu Down), Menu>
(Menu Up), <Select (Cursor Down), Select> (Cursor Up), Enter and Exit. The
functions of each key is explained below:
<Menu: Previous menu screen. In combination with the channel Mute key, the
specific channel Menu is displayed.
Menu>: Next menu screen. In combination with the channel Mute key, the specific
channel Menu is displayed.
<Select: Previous cursor in the menu screen
Select>: Next cursor in the menu screen
DSPSeries - MUS - Ver 1.1 ENG
D
E F G
Nov 10 6