The Rear Panel - Master audio DSP306USB User Manual

Master Audio

4.THE REAR PANEL

B
A C
A) Power switch - Controls power On/Off.
B) Main Fuse - T200mA-250V. Slow blow type.
C) Main Power - Connects via a standard IEC socket. A compatible power cord is
supplied with the unit. The voltage input is 90-240VAC, 50-60Hz
D) Ethernet slot – Slot to install the optional Ethernet module. With this accessory,
the unit can be connected to a router, switch or PC through CAT-5 cable.
E) XLR input and outputs - Separate 3-pin XLR connectors are provided for each
audio input and output. The device's output stage employs the balanced
impedance topology. All I/O connectors have pin 1 as ground (shield), pin 2 as +
and pin 3 as -.
DSPSeries - MUS - Ver 1.1 ENG
D
E
Nov 10 8