Operating The Software; Version Info - Master audio DSP206 User Manual

Master Audio

Version Info

HW: 4.9.3
IP Address
169.254.50.254
NOTE: In DSP206, where no network card is available, IP Address and MAC
Address are shown with default values (all zero).
5.3.5 Routing (DSP608 only)
The routing function assigns the inputs to the outputs using pre-established
templates. The templates are shown in the table below:
Routing Out 1
Stereo 1-Way In1,In3
Stereo 2-Way In1,In3
Stereo 3-Way In1,In3
Stereo 4-Way In1,In3
Mono 8-Way In1,In3
The unit assigns the Input source for the corresponding outputs when each routing
mode is selected. The Stereo configuration will also activate the links between paired
channels (Out 1&2, Out 3&4, Out 5&6, Out 7&8)
Routing:
Stereo 3-Way
NOTE: The configuration mode configures the input sources when selected. The user
can change the source afterwards if desired. It does not keep the configuration in
memory.

6 OPERATING THE SOFTWARE

6.1 Device List
Once the software DSPLink is started, a window with the list of connected devices is
shown. To access the main window of each device, click on the arrows icon ">>"
6.2 Device Options
6.2.1 Main window
In this window the Preset options, the device name, and the input and output levels
and VUMeters, as well as the link and mute settings are displayed.
DSP206-608. Version 1.2
MAC Address
B896:74:01:01:C1
Out 2 Out 3 Out 4
In2,In4 Off
In2,In4 In1,In3 In2,In4
In2,In4 In1,In3 In2,In4
In2,In4 In1,In3 In2,In4
In1,In3 In1,In3 In1,In3
Out 5 Out 6
Off Off Off
Off Off
In1,In3 In2,In4
In1,In3 In2,In4
In1,In3 In1,In3
Out 7 Out 8
Off Off
Off Off
Off Off
In1,In3 In2,In4
In1,In3 In1,In3
Apr 14 18