Programming From Search Mode - Uniden BC350C Manual

Programming from SEARCH mode.

For example, when you find an interesting active police fre-
quency while searching 144 - 148 band, and want to program
it into POLICE bank (see "Band Search" on page xx to search
a frequency).
1. Press [HOLD]. HOLD icon
appears in the display.
2. Press [PROG]. CH appears
and blinking to indicate that
you are in the programming
mode.
3. Press [POLICE]. POLICE icon
appears in the display.
If you want to program it into
another bank, press the
desired bank key. The bank
name appear on the display.
2 screens alternate to indicate
that channel 1 is available to
be programmed.
The scanner automatically
selects the lowest open
channel (000.0000) for easy
programming. If all channels
have been programmed (there
are no open channels in the
bank), channel 1 appears.
Use the [UP] or [DOWN] keys
to select a new channel and
even over write old channels.
4. Press [PROG] to store the
frequency in the desired
channel.
Note: Press [BAND] to escape
from programming mode before
step 4.
26