Deleting A Programmed Frequency - Uniden BC355C Owner's Manual

police fire/emg
6
hold scan
Deleting a Programmed Frequency (programming "000.0000")
The easiest method of deleting a frequency you have
programmed is to overwrite it with a null frequency (000.0000).
CH
hold

40.0600
40.0600
Press PROg. The scanner
programs the frequency
into the indicated channel
and then goes into SCAN
HOLD mode.
Press HOlD to release the
Hold and continue scanning
the rest of the programmed
channels, starting with
the channel you just
programmed.
From a normal scan setting
(a channel bank is flashing),
press PROg. HOLD displays
and CH displays and flashes.
Press and hold l/O for .
seconds.