To Find "000.0000" In Search Band 50 - 54; Program Lock Feature - Uniden BC350C Manual

To find "000.0000" in any Search Band
1. Select Search Band 50 - 54 by pressing [BAND] in the
Search ode, for example band 50-54.
2. Press [HOLD] to stop searching.
3. Press [PROG] to go into Program Mode.
4. Use [UP] and [DOWN] to display "50.0000" or "54.0000".
5. Press [DOWN] one time at the "50.0000" screen to display
"000.0000"
– OR –
For example to erase a programmed frequency in channel 13
of the PRIVATE BANK:

Program Lock Feature

The BC350C has a program lock feature [Memory Lock] to
prevent accidental programming entries or unauthorized pro-
gramming. Simply turn on the MEMO LOCK switch on the
rear panel to disable [PROG] and protect your programmed
frequencies in memory.
1. Find this screen in the
programming Mode.
2. Press [PRIVATE]. PRIVATE
appears in the display.
2 screens alternate to indicate
that Channel 1 is ready to be
programmed.
3. Use [UP] or [DOWN] to select
Channel 13.
Now, Channel 13 is ready to
be programmed.
4. Press [PROG] to end
programming.
The frequency of Channel 13
is erased and now it is an
open channel. L/O appears on
the display because the
scanner locks out all open
channels automatically.
28