Table of Contents
Advertisement
Specifications
General Specifications
Attribute
Number of inputs
Number of outputs
Communication rate, IO-Link
Device cable length, IO-Link, max 20 m
Terminal base screw torque
Module location
POINTBus current, max
Power dissipation, max
Thermal dissipation, max
Isolation voltage
Field power bus supply, nom
Field power bus supply, min
Field power bus supply, max
Indicators
(1)
Wiring category
Wire size
Wire type
Dimensions, approx., HxWxD
Weight, approx.
Enclosure type rating
Keyswitch position
(1)
Use this conductor category information for planning conductor routing as described in Industrial Automation Wiring
and Grounding Guidelines, publication 1770-4.1.
POINT I/O 4 Channel IO-Link Master Module
Value
4 single-ended, non-mutual isolated, configurable
4.8 kB; 38.4 kB; 230.4 kB
0.8 Nm (7 lb-in.)
1734-TB, 1734-TBS, 1734-TB3, 1734-TB3S, 1734-TOP, 1734-TOPS,
1734-TOP3, or 1734-TOP3S wiring base assembly
100 mA @ 5V DC
1.5 W @ 28.8V DC
5.12 BTU/hr @ 28.8V DC
50V (continuous), Basic Insulation Type
Tested at 2121V DC for 60 s, field-side to system. No isolation
between individual channels.
24V DC
19.2V DC
28.8V DC
1 green/red – module status indicator
1 green/red – network status indicator
4 yellow – channel status indicators
4 green – IO-Link status indicators
2 – on signal ports
2
0.25...2.5 mm
(22...14 AWG) solid or stranded copper wire rated at
75 °C (167 °F), or greater. 1.2 mm (3/64 in.) insulation max
Copper
56 x 12 x 75.5 mm
(2.21 x 0.47 x 2.97 in.)
36 g (1.27 oz)
None (open-style)
2
Publication 1734-IN043A-EN-E - September 2015
17
Hide quick links:
Advertisement
Table of Contents
