Using Call Forwarding; Automatically Forwarding Calls; Delayed Call Forwarding - Siemens OpenStage 60 T Operating Instructions Manual

Step by Step

Using call forwarding

Please note the description for programming call
forwarding

Automatically forwarding calls

The relevant service personnel can configure different
call forwarding settings in the system for internal and
external calls and activate these settings for your sta-
tion. The following calls may be forwarded
• All calls without restriction
• Calls on busy
• Calls on no reply
Forwarding for all calls without restriction should only
be configure if the station is only used for outgoing calls
(e.g. in an elevator).
If you have configured fixed or variable forwarding and
the manual forwarding destinations are not reachable
(e.g. busy), calls are automatically forwarded to system
forwarding destinations.

Delayed call forwarding

This function is configured by the relevant service per-
sonnel for the system.
Prerequisite: The second call feature must be activated
page 62.
If you have activated "Call forwarding busy/no reply" or
"Call forwarding no reply" (
call waiting tone when a second call is received and the
caller information will appear in your display. You then
have the option of accepting this call before call for-
warding is activated (e.g. if you are waiting for an urgent
call).
The caller hears the ring tone and is only forwarded to
another station once a set time has elapsed.
Enhanced phone functions
page 48.
page 48), you will hear a
77