Routine Maintenance; Weekly; Monthly - Challenge Handy-Drill Instructions And Parts Manual

9.0 Routine Maintenance

9.0 Routine Maintenance
See page 4, SAFETY PRECAUTIONS, for Power Lockout Procedure.
A clean, lubricated machine will run longer and smoother, with less downtime and fewer repairs.
Schedule lubrication both early in the day and early in the week. This allows the lubricants to work
into the machine. Lubrication at the end of the day or week allows the lubricants to run off without as
much benefit to the machine. The following guidelines will help you set up a regular maintenance
schedule:

9.1.1 Weekly


Clean — The table should be wiped down periodically. Use a non-abrasive cleaner. The
machine's exterior should be cleaned with a non-abrasive water based detergent applied to a
damp cloth. Always be careful when cleaning around safety warning labels. Use limited
amounts of cleaners in those areas.

9.1.2 Monthly


Disconnect power. Remove the cover from the main machine. Lubricate the head, guide
rods using light machine oil.
16
DISCONNECT POWER before making any adjustments or lubricating.