Configuration Of Hivrrp Domains - Hirschmann Power MICE User Manual

VRRP/HiVRRP
VLAN 1 + 2 + 3 + 4
HiVRRP-
Domain 1
VR ID 11
VR ID 12 VR ID 12
VR ID 13 VR ID 13
VR ID 14 VR ID 14
A
VLAN Router
Interfaces
Subnet A
VLAN 1
Figure 17: Example of how a HiVRRP domain is used

5.3.1 Configuration of HiVRRP domains

The configuration of HiVRRP domains consists of the following steps:
Create VLANs
Configure VLAN router interfaces
Assign the IP addresses to the router interfaces
Configure HiVRRP instances
– Activate VRRP instance (all instances)
– Assign IP address (all instances)
Within a router, you either configure all instances as
IP address owners, or no instance as an IP address owner.
– Assign priority (supervisor)
Assign the supervisors different priorities so that the VRRP routers can
agree on a master router.
– Switch on HiVRRP (all instances)
Routing L3E
Release 4.2 08/08
Virtual Router 1
Virtual Router 2
Virtual Router 3
Virtual Router 4
Subnet B
VLAN 2
5.3 HiVRRP Domains
HiVRRP 11 (+ 12 + 13 + 14)
Subnet C
VLAN 3
HiVRRP-
Domain 1
VR ID 11
VR ID 12 VR ID 12
VR ID 13 VR ID 13
VR ID 14 VR ID 14
B
Subnet D
VLAN 4
51