Configuration Of The Router Interfaces - Hirschmann Power MICE User Manual

Static Routing

3.1.1 Configuration of the Router Interfaces

10.0.1.5/24
Figure 8: Simplest case of a route
enable
configure
ip routing
interface 2/1
ip address 10.0.1.1
255.255.255.0
routing
exit
interface 2/2
ip address 10.0.2.1
255.255.255.0
routing
exit
exit
show ip interface brief
Interface IP Address
--------- --------------- --------------- -------- --------
2/1 10.0.1.1
2/2 10.0.2.1
show ip interface 2/1
Routing L3E
Release 4.2 08/08
Interface 2.1 Interface 2.2
IP=10.0.1.1/24 IP=10.0.2.1/24
IP Mask
255.255.255.0
255.255.255.0
3.1 Port-based Router Interface
10.0.2.5/24
Switch to the Priviledged EXEC mode.
Switch to the Configuration mode.
Switch on the router function globally.
Select the first port at which you want to enter the
router interface IP address.
Assign the IP parameters to the port.
Switch on the router function at this port.
Switch to the Configuration mode.
Select the second port at which you want to enter
the router interface IP address.
Assign the IP parameters to the port.
Switch on the router function at this port.
Switch to the Configuration mode.
Switch to the Priviledged EXEC mode.
Verify the entries.
Netdir
Bcast
Disable
Disable
Verify the rest of the settings of interface 2/1.
Multi
CastFwd
Disable
Disable
23