Vrrp Mit Multinetting - Hirschmann Power MICE User Manual

VRRP/HiVRRP

5.6 VRRP mit Multinetting

The router allows you to combine VRRP with Multinetting.
10.0.1.13
Default Gateway
10.0.1.12
10.0.1.100
10.0.1.11
Default Gateway
10.0.2.13
10.0.2.100
Figure 22: Virtual router with multinetting
To use VRRP with multinetting, you perform the following configuration steps
on the basis of an existing VRRP configuration
Assign a second (secondary) IP address to the port.
Assign a second (secondary) IP address to the virtual router.
interface 2/3
ip address 10.0.2.1
255.255.255.0 secondary
ip vrrp 1 ip 10.0.2.100
secondary
Perform the same configuration on the redundant router also.
62
5.6 VRRP mit Multinetting
IP=10.0.1.1
IP=10.0.2.1
10.0.1.100
VR
10.0.2.100
(see fig.
Select the port at which you want to configure
multinetting.
Assign the second IP address to the port.
Assign the second IP address to the virtual router
with the VR-ID 1.
A
B
IP=10.0.1.2
IP=10.0.2.2
13):
Routing L3E
Release 4.2 08/08