Configuration Of A Static Route - Hirschmann Power MICE User Manual

Static Routing

3.3.1 Configuration of a Static Route

Enter a static route for router A based on the configuration of the router inter-
face in the previous example
enable
configure
ip routing
ip route 10.0.3.0
255.255.255.0 10.0.2.2
exit
show ip route
Total Number of Routes......................... 3
Network
Address
--------------- --------------- ------------ ------ -------------
10.0.1.0
10.0.2.0
10.0.3.0
Configure router B in the same way.
30
(see fig. 8):
Switch to the Priviledged EXEC mode.
Switch to the Configuration mode.
Switch on the router function globally.
Create the static routing entry.
Switch to the Priviledged EXEC mode.
Verify the routing table:
Subnet
Mask
255.255.255.0
255.255.255.0
255.255.255.0
3.3 Configuration of a Static Route
Next Hop
Protocol Intf
Local 2/1
Local 2/2
Static 2/2
Next Hop
IP Address
10.0.1.1
10.0.2.1
10.0.2.2
Routing L3E
Release 4.2 08/08