Break Pack Down - Midtronics INTELLECT EXP HD Instruction Manual

Break Pack Down

If you choose to test ndvdual batteres, the EXP uses the parameters from the pack test and prompts you
through the steps of dsconnectng the pack, testng each battery, and reconnectng.
To test ndvdual batteres after a CHECK BATTERY PACK decson:
1. Select BREAK PACK DOWN and press the NEXT soft key to contnue.
2. Dsconnect the EXP from the battery posts.
3. Dsconnect the battery pack, and press the NEXT soft key.
4. When prompted, connect to the frst battery and press the NEXT soft key.
5. The EXP takes a few seconds to evaluate the battery. If any messages appear before the EXP
dsplays the results, refer to "Battery Test: Addtonal Test Requrements.
6. If the battery decson s REPLACE or BAD CELL, the EXP asks you to use the alphanumerc
keypad to enter the battery's seral number. The number, whch s located on the battery
case. To backspace, use the LEFT ARROW key. When fnshed, press the NEXT soft key to
contnue.
7. When you test the last battery, the EXP dsplays the results. Press the DOWN ARROW key
to vew the ndvdual battery results. See an example of the results on the next page.
Chapter 7: Battery and Starter System Test—Truck