Easy Ip Setup Software - Panasonic AW-RP50 Quick Start Manual

Network-related settings on AW-XXXX can be set via EASY IP Setup Software (on CD-ROM) that comes with the
camera. EASY IP Setup Software also enables displaying the Web screen for AW-XXXX.
* For the connection between PC and AW-XXXX, please refer to the Manual 【Controlling AW-XXXX Camera via PC】.
● Change the IP address of AW-XXXX via EASY IP Setup Software.
Example: Procedure for changing the IP address of AW-XXXX from (192.168.0.10) to (192.168.0.11)
1. Start up EASY IP Setup Software and click [Search] button. Connected cameras will be extracted.
● Cameras that are being connected are shown together with their network information such as MAC
address, IP address.
2. Click the camera you want to change, and then click [Network Settings] button.
3. Enter (192.168.0.11) into IPv4 Address box and click [Save] button. Change of the camera setting will be
executed. When "Camera setup completed." is displayed, the change is completed. (It takes about 2 – 3 minutes
before the change of setting is completed.)
(NOTE) For security enhancement, when 20 minutes or more have passed after the power is turned on, AW-XXXX no
longer allows you to set the network settings via EASY IP Setup Software. If the message is displayed,
please reboot AW-XXXX, and then set the settings.

EASY IP Setup Software