Panasonic AW-RP50 Quick Start Manual page 11

● Display the Web screen for AW-XXXX via EASY IP Setup Software.
1. Start up EASY IP Setup Software and click [Search] button. Connected cameras will be
extracted.
2. Click the camera you want to change, and then click [Access Camera] button. Web screen will be displayed.
Power Button
If AW-XXXX is in STANBY mode (power OFF: factory default), please use [Power ON] button to turn it ON.
As the initial screen, Live Screen [Live] is displayed. You can switch to Web Setup Screen [Setup] when necessary.
For the detailed operations, please see page 57 and after of AW-XXXX Operating Instructions <Operations
and Settings>.
★ If your PC does not have Plug-In Viewer Software installed, the confirmation message for installation will be shown
before Live Screen is displayed. In this case, please follow the instructions of the message to install the software. For
the details, please see page 48, "Installing the plug-in viewer software" of AW-XXXX Operating Instructions <Basics>.
(Web Screen for AW-XXXX)