Safety; Intended Use; Owner Requirements - Inficon HLD6000 Original Operating Instructions

2

Safety

2.1

Intended use

Unauthorized use
2.2

Owner requirements

Safety conscious
operation
Personnel qualifications
The device is a leak detector for sniffer leak detection. With the device you locate and
quantify leaks on test objects. The HLD6000 sniffs for different gases depending on which
sniffer line is connected. The following sniffer lines are available:
 SMART sniffer line for R22, R32, R134a, R404A, R407C, R410A, R1234yf, R1234ze and 3
additional gases from the selectable gases that are verifiable by the device,
 Sniffer line for R744 (CO
 Sniffer line for R600a and R290.
A test object always contains gas under overpressure. Check the exterior of the test ob-
jects for escaping gas using a sniffer line (sniffing method).
► You must install, operate and service the device only in compliance with these
operating instructions.
► Adhere to the restrictions of use
Do not suck up liquids with the device.
►
Never hold the sniffer probe into liquids but sniff only for gases.
►
The following notes are for companies or any person who is responsible for the safety and
effective use of the product by the user, employee or third party.
► Only use the device when it is technically in good order and condition.
► Only operate the device in accordance with this instruction manual, in a safety and risk
conscious manner.
Adhere to the following regulations and observe their compliance:
►
– Intended use
– Generally applicable safety and accident prevention regulations
– International, national and local standards and guidelines
– Additional device-related provisions and regulations
► Only use original parts or parts approved by the manufacturer.
► Keep this instruction manual available on site.
Only instructed personnel should be permitted to work with and on the device. The
►
instructed personnel must have received training on the device.
Personnel in training should only be allowed to work with and on the device under the
►
supervision of trained qualified service technicians.
► Make sure that the authorized personnel have read and understood the operating
instructions and all other applicable documents, especially the information on safety,
maintenance and repairs, before starting work
page 7) .
Regulate the responsibilities, authorizations and supervision of personnel.
►
),
2
(see "4.4 Technical data", page
(see "1.2 Other applicable documents",
17).
9
2 Safety