Product Mounting Diagram - Chauvet WELL FLEX Quick Reference Manual

WELL™ Flex QRG
Mounting
Product
Mounting
Diagram
Control Panel
Description
Before mounting this product, read the
point per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our CHAUVET® line of mounting clamps, go to
www.trusst.com/productcategory/accessories-clamps/.
Overhead Mounting
When using only one mounting clamp, be sure to use a clamp with a captive
bolt to prevent accidental loosening.
Button
<ON/OFF> Turns product on/off
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases
<DOWN>
the numeric value when in a function
Safety Notes. Use at least one mounting
Mounting Clamp
Function
5
Safety Cable
(such as CH-05
from CHAUVET®)
Floor Mounting
EN