Table of Contents
Advertisement
EN
DMX Linking
DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
The COLORdash™ Par-Hex 12 will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
The COLORdash™ Par-Hex 12 uses a regular DMX data connection for its
DMX personalities: 6 Ch, 8 Ch, 12 Ch, 13Ch, HSV, and HSI. See the
User Manual to connect and configure for DMX operation.
The COLORdash™ Par-Hex 12 uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Mounting Clamp
(such as CLP-15 or CLP-15N clamp
from CHAUVET®)
Overhead Mounting
Button
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
COLORdash™ Par-Hex 12 QRG
Secure the safety cable using
the passageway on the back
of the product.
Function
3
Floor Mounting
Advertisement
Table of Contents
