Safety Notes - Chauvet WELL FLEX Quick Reference Manual

WELL™ Flex QRG
About This Guide
Disclaimer

Safety Notes

Contact
What Is
Included
The WELL™ Flex Quick Reference Guide (QRG) has basic product information
such as connection, mounting, menu options, and DMX values. Download the
User Manual from www.chauvetprofessional.com
The information and specifications contained in this QRG are subject to change
without notice.
·
DO NOT open this product. It contains no user-serviceable parts.
·
DO NOT look at the light source when the product is on.
·
CAUTION: This product's housing may be hot when lights are operating.
·
Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
·
DO NOT leave any flammable material within 50 cm of this product while
operating or connected to power.
·
USE a safety cable when mounting this product overhead.
·
DO NOT submerge this product (IP44). Temporary outdoor operation is fine.
·
DO NOT operate this product if the housing, lenses, or cables appear
damaged.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected circuit.
·
ONLY use the hanging/mounting bracket or the handle to carry this product.
Do not carry by the moving head.
·
In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
·
From outside the U.S., UK, Ireland, or Mexico, contact the distributor of
record to request support or return a product.
·
From inside the U.S., UK, Ireland, or Mexico, use the information in
Contact Us at the end of this QRG.
·
WELL™ Flex
(Six-pack road case or single product)
·
Neutrik® powerCON® power cord
·
Omega bracket with mounting hardware
(for each product)
·
·
·
2
for more details.
Rubber plug (for each product)
Warranty Card
Quick Reference Guide
EN