Dmx Connection; Master/Slave Connection; Product Mounting Diagram - Chauvet COLORDASH ACCENT QUAD Quick Reference Manual

COLORdash™ Accent Quad QRG
DMX Linking

DMX Connection

Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
The COLORdash™ Accent Quad will work with a DMX controller using a 5-pin
DMX serial connection.
www.chauvetprofessional.com.
The COLORdash™ Accent Quad uses a 5-pin DMX data connection for its DMX
personalities: 4 Ch, 6 Ch, and 10Ch. See the User Manual for information about
connecting and configuring the product for DMX operation.
The COLORdash™ Accent Quad uses the DMX data connection for its
Master/Slave mode. See the User Manual for information about connect and
configure the product for master/slave operation.
Before mounting this product, read the
point per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our Chauvet line of mounting clamps, go to
www.trusst.com/productcategory/accessories-clamps/.
Overhead Mounting
Button
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases
<DOWN>
the numeric value when in a function
A DMX
Safety Notes. Use at least one mounting
Mounting Clamp
(such as CLP-15 from
Chauvet
Function
3
Primer is available
Safety Cable
(such as CH-05 from
Chauvet)
Secure the safety cable
using the passageway
on the back of the
product.
Floor Mounting
EN
from